This is a 16 watt Mono Integrated Tube Amplifier Kit  that is easy to build, sounds great, and is just fun!  This Mono Integrated Tube Amplifier utilizes 5670 triode and 6005 pentode tubes.  The amplifier has built in volume control so that it can be driven directly from a CD player, tuner, etc.  The amplifier operates on 120 or 240 Volts, 50 or 60 hertz and may be plugged into a convenient outlet.

The 16LM Mono Integrated Tube Amplifier can be purchased in both kit form (K-16LM) or fully assembled (16LM).  If you desire to build the kit, the kit comes complete with all the resistors, capacitors, tubes, connectors, circuit board, transformers, and necessary hardware for mounting on the provided "bread board". (For the240 customer  they must supply the proper power cord for their area.)

Model 8LM Mono Integrated Tube Amplifier

   Input Impedance = 100k ohms
   Input connector =  RCA jack     
   Output Impedance = 4 ohms
   Output Power = Push Pull 16 Watts  (in to 4 ohms)
   Speaker Impedance = 4 to 8 ohms
   The circuit is a Class A amplifier
   Minimum Input for full output = .5 V
   Frequency Response = 20 to 20,000 Hz
   Total Harmonic Distortion at 1 Watt <1%


Model 16LM
    Page Updated October 2018
Caution: These Amplifiers may be operated as
supplied, however voltages in excess of 240 volts
are present on the board and the tubes get
very hot. It is advised that the amplifier be mounted in a
well-ventilated metal enclosure to reduce the potential of
fire or shock.
"L" Series